Industrial Hopper Stokers
Available in feed rate sizes from 150 to 750lbs. of coal per hour, the Hopper Model Stoker features an easy to install Windbox type burner. The large capacity hopper is built with a heavy steel base and strengthened with a replaceable steel liner for long life. A single motor drives both the gear transmission and blower fan.
- Automatic Air Control
Prevents excessive soot and smoke by automatically regulating fuel bed requirements.
- Clean-Out Plate
Hopper models have convenient clean-out plate for easy removal of any obstruction in coal screw.
Proven through fifty years of dependable field use, the transmission features rugged gearing operating in a bath of oil within a cast iron case. Three available coal feedrate speeds, plus neutral, are controlled by an external gear shifting lever.
Narrow design for no interference in cleaning fires. Mounted on hinged frame for ease in cleaning boiler or flues.
- Smoke Eliminator
Eliminates back-flow of combustion chamber gasses by air injected into worm housing.
- Overload Protection
Shear pin gives positive protection against damage to transmission.
Self-cleaning Venturi Stepped type, properly sized for coals to be used. Sectional design for easy removal.
|Shipping Weight ***||1210#||1240#||1240#||1500#||1550#||1550#||1630#||1665#||1890#|
* Hopper to Burner centerline, ** Special motors available, *** Standard length
Note: Basic information is shown above. For complete information, refer to dimensional drawings. Stoker Length – available 12″, 24″ and 36″ longer than standard.