Heavy Commercial Hopper & Bin Feed Stokers

Available in feed rate sizes from 100 to 150lbs. of coal per hour, the Hopper and Bin Feed Model Stokers feature an easy to install Windbox type burner. The rugged hopper is built with a heavy steel base and strengthened with a replaceable steel liner for long life. A single motor drives both the gear transmission and blower fan on hopper models. Separate drive and blower motors are utilized on bin feed models. Units are supplied with extended windbox.Heavy Commercial Hopper & Bin Feed Stokers

Available in feed rate sizes from 100 to 150lbs. of coal per hour, the Hopper and Bin Feed Model Stokers feature an easy to install Windbox type burner. The rugged hopper is built with a heavy steel base and strengthened with a replaceable steel liner for long life. A single motor drives both the gear transmission and blower fan on hopper models. Separate drive and blower motors are utilized on bin feed models. Units are supplied with extended windbox.
Available in feed rate sizes from 100 to 150lbs. of coal per hour, the Hopper and Bin Feed Model Stokers feature an easy to install Windbox type burner. The rugged hopper is built with a heavy steel base and strengthened with a replaceable steel liner for long life. A single motor drives both the gear transmission and blower fan on hopper models. Separate drive and blower motors are utilized on bin feed models. Units are supplied with extended windbox.

Features

  • Automatic Air Control
    Self-operating air control is standard on all 100 and 150 stokers. It automatically regulates fuel bed air requirements for efficient burning. Adds longer life to exposed parts by dispersing excessive heat.
  • Clean-Out Plate
    Both hopper and bin feed models have convenient cleanout plate for easy removal of any obstruction in coal screw.
  • Dependable Transmission
    Transmission is enclosed in a sealed case and operates in a bath of oil. Changing coal speeds is easy to do by simply shifting the V-belt on pulleys. Loosening hand wheel provides neutral position. NEMA standard motor. Shear pin gives positive protection against damage.
  • Hopper
    Narrow design for minimum interference in cleaning fires. Hopper is mounted on a hinged frame which tips over on each side for ease in cleaning boiler or flues.
  • Smoke Eliminator
    Air is injected into worm housing under pressure, eliminating back-flow of gasses from the combustion chamber.
  • Tuyeres
    Self cleaning Venturi Stepped type, properly sized for coals to be used. Sectional design for easy removal.

Specifications

DescriptionSW100SW150SBW100SBW150
Bin Plate to Burner Center*--9696
Burner Height13-1/413-1/413-1/413-1/4
Burner Width12-3/412-3/412-3/412-3/4
Burner Length19-1/419-1/419-1/419-1/4
Hopper to Burner Center**6666--
Motor H.P.***1/23/4--
Motor H.P.(Trans)***--1/31/2
Motor H.P.(Fan)***--1/33/4
Shipping Weight (lbs.)810850865890

NOTE: Basic information is shown above. For complete information, refer to dimensional drawings.
* Available up to 84″ longer than standard in six-inch increments
** Available 12″, 24″ and 36″ longer than standard. Also available 12″ and 24″ shorter than standard
*** All units provided single phase. Three-phase motors available upon request.
Not for anthracite coal.